If you’re like most people, you probably don’t think about your air filters until they start causing problems. But changing your air filters is a quick and easy way to improve the air quality in your home and keep your HVAC system running efficiently. In this blog post, we’ll show you how to change your air filters quickly and easily. Keep reading to learn more!
Remove Old Air Filters
The first step is to remove the old air filters. You can do this by opening the cover of the filter and pulling it out from there. If you have a filter with a cover, then you need to open that up and pull out the filter from there. Most of the covers are held in place by screws or clips, so you will need to use a screwdriver or a flathead screwdriver to take them off.
Clean Out The Housing
Now that you have removed the old air filters, it is time to clean out their housing. This is important because if there are any dust particles left over in the housing, they will only get into your new filters and cause them to clog up more quickly than they should be.
To clean out the housing, simply grab some paper towels and wipe all around inside of it. Be sure not to leave any paper towels inside of it once you are done cleaning it! Also be sure that no dust particles fall into your new air filters when you install them later on in this process!
Clean Out The New Air Filters
This step is optional, but we highly recommend doing it anyway. If you have purchased high-quality air filters for your furnace or AC unit , then chances are that they did not come with any kind of packaging at all.
In this case, we recommend taking some paper towels and wiping them down before installing them in your system . This will help ensure that no dust or dirt particles get onto your new air filters as soon as they are installed!
Install New Air Filters
Now that everything is cleaned out, it’s time to install your new air filters ! Simply open up their cover (if applicable) and insert one end into each slot on either side of the housing . Then push down until both ends snap into place . If there was already an old filter inside of the housing before you started this project , then make sure that nothing falls out when you put your new filter in!
Turn On Your Furnace Or AC Unit
Now that everything is in place, it’s time to turn on your furnace or AC unit and see how everything works! If you have a thermostat , then I recommend turning the heat or air conditioning all the way up for about 30 minutes .
This will allow your system to warm up and blow out any dust particles that may be inside of it. After 30 minutes, turn off your system and let it cool down for about 15 minutes before turning it back on again. This will give you the best chance at avoiding any major problems with your new filters!
Changing your air filters is an easy way to keep your home’s air clean and improve your indoor air quality. Not only that, but it’s a job you can do yourself in just a few minutes. By following the simple steps we outlined in this blog post, you can change your air filters like a pro and breathe easier knowing that your family is breathing healthier air.